5% Purge Air Heatless Modular Desiccant Air Compressor Dryer |

Features
1. Less than 5% purge air without auxiliary equipment, 012KW power consumption 2. Pressure and inlet temperature is digital readout on screen; purge air gauge allows manually control regeneration air according to the wanted pressure dew point 3. Small desiccant chambers' group, each chamber unit is independent and detachable 4. Replace with factory filled desiccant chamber, ease of maintenance and constant pressure dew point -40ºC (-40ºF) is ensured 5. The lowest operation cost, user could recoup dryer investment in three years by saving huge air and electricity 6. 1/3 size to traditional dryer 7. The shortest downtime 8. Using Molecular sieve as desiccant |

How it works

Drying cycle
The process air enters the dryer through the inlet and is directed into the on-line drying chamber via the inlet valves and lower manifold. The air is evenly distributed through the drying units and passes over the desiccant material, reducing the water vapour content. The dried process air then combines in the upper manifold and exits the dryer via the outlet check valves |
Column changeover
Before the on-line (drying) and off-line (regenerating) columns change over, the dryer exhaust valve, is closed, allowing the purge air to re-pressurise the off-line columns. This ensures a consistent system pressure and dewpoint when the drying chambers change over. |
Regeneration cycle
At the start of the regeneration cycle, the exhaust valve of the dryer is closed and the off-line chamber is at full line pressure. The air in the off-line chamber has a dewpoint equal to the air leaving the dryer. The exhaust valve is then opened and the dry air within the chamber expands rapidly as it leaves the dryer via the exhaust silencer, forcing water to be removed from the desiccant material. Once the off-line chamber has de-pressurised, a continuous bleed of dried process air is directed into the off-line upper manifold. This air is known as purge air. With the exhaust valve open, the purge air expands from line pressure to atmospheric pressure and flows downwards through the columns, over the off-line desiccant material. As the purge air at line pressure contains a fixed amount of water vapour, allowing it to expand means the purge air becomes even drier, increasing its capacity to remove water from the saturated desiccant bed. |
Details of advantages
Innovative structure with patents, adopts small desiccant chamber unit  1. Air flow equally and evenly pass through each desiccant chamber 2. Avoid channeling effect which more likely happens in traditional desiccant dryer 3. Small chamber allow no pressure vessel annul inspection 4. Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer 5. Easy to maintain and replace factory filled desiccant chamber unit, ensure good performance as beginning 6. PLC controller, Full function touch panel control |

Product details

Specification data
BTGMXW-B Series | Heatless | |||||||
Model | Pipe Size (inch) | Flow Range(m³/min) | Dimension(mm) | Weight(kg) | ||||
@5~6bar | @6~7bar | @7~10bar | L | W | H | |||
BTGMXW015-B | G1 | 1.1 | 1.3 | 1.5 | 380 | 240 | 828 | 78 |
BTGMXW026-B | G1 | 1.9 | 2.3 | 2.6 | 380 | 240 | 978 | 87 |
BTGMXW038-B | G1 | 2.7 | 3.3 | 3.8 | 486 | 240 | 978 | 106 |
BTGMXW065-B | G2 | 4.8 | 5.8 | 6.5 | 486 | 240 | 1628 | 159 |
BTGMXW085-B | G2 | 6 | 7.4 | 8.5 | 595 | 240 | 1628 | 192 |
BTGMXW106-B | G2 | 7.4 | 9.1 | 10.6 | 703 | 240 | 1628 | 226 |
BTGMXW146-B | G2 | 9.8 | 12 | 14.6 | 920 | 240 | 1628 | 293 |
BTGMXW165-B | G2 | 11.6 | 14.2 | 16.5 | 1029 | 240 | 1628 | 327 |
BTGMXW206-B | G3 | 14.6 | 17.8 | 20.6 | 1250 | 240 | 1628 | 380 |
BTGMXW248-B | G3 | 16.7 | 20.5 | 24.8 | 829 | 480 | 1628 | 510 |
BTGMXW295-B | G3 | 21.5 | 26.3 | 29.5 | 938 | 480 | 1628 | 574 |
BTGMXW336-B | G3 | 24.1 | 29.5 | 33.6 | 1047 | 480 | 1628 | 638 |
BTGMXW385-B | G3 | 26.8 | 32.8 | 38.5 | 1156 | 480 | 1628 | 702 |
BTGMXW425-B | G3 | 29.7 | 36.4 | 42.5 | 1265 | 480 | 1628 | 767 |
BTGMXW465-B | G4 | 32.7 | 40.1 | 46.5 | 1374 | 480 | 1628 | 831 |
Installation

About Biteman technology
Biteman technology, the leading supplier and manufacturer of high efficiency desiccant air dryer and filter in China, with the advantages in low consistence PDP -40ºF, high efficiency 5% purge air, and easy to maintain, has widely applied for GM/P&G/Gree/BYD all over the world.  Contact us today to learn more. www.bitemantech.com |
Â
Johnson screen is a v-type wire welding filter element developed by Johnson Company in order to solve the problem of solid-liquid separation. The surface wire is connected together with the support rods by welding.
The platelike Johnson screen is one kind of Johnson screen and can be made into different shapes (Johnson Screen Sieve Plate, Johnson Screen Support Grid, Curved Platelike Johnson Screen, Circular Platelike Johnson Screen and so on). Its filtration mode is filtering from the outside to the inside and filtering from the inside to the outside
The minimum slot opening of platelike Johnson screen is 25 um (0.001 inch) and the maximum slot opening platelike Johnson screen is 25 millimeter (1 inch).
The common material is 304, 321, 316 L, 904 L duplex stainless steel 2205, duplex stainless steel 2507, monel alloy.etc.
It is widely used in many fields, such as petroleum refining and refining industry, water supply and sewage treatment, pulp and paper industry, mining and sand processing, construction industry, food filtration, nuclear power and so on.
Platelike Johnson Screen
Well Screen,Platelike Johnson Screen,Ss Platelike Johnson Screen,Stainless Steel Platelike Johnson Screen
Xinxiang Shengda Filtration Technique Co., Ltd. , https://www.filtrations.nl