
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate & go! !
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Â
Item No.: |
ID-309 |
Can Size: | 65mm DÂ x 158mm H |
Package: | 450ml x 12pcs/ctn |
Carton Size: | 275x205x205 mm |
20ft Container Loading | 2500 cartons  |

Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate & go! !
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Â
Item No.: |
ID-309 |
Can Size: | 65mm DÂ x 158mm H |
Package: | 450ml x 12pcs/ctn |
Carton Size: | 275x205x205 mm |
20ft Container Loading | 2500 cartons  |
There are many products classified in this section of Folding Machine For Shirts. They are focused on folding all kinds of shirts, Polo, thin jacket,thin sweater. Attention: The following garment are applied to this auto folding packing machine. Like, garment designed with many accesories, too thick coat,suits t shirts.
All machine include the following function:
1.Within the allowable value range, the folded length and width can be adjusted as you want.
2.?The machine can automatically detect the length of garment, when the garment size is different, machine can intelligently identify and automatically fold according to the first folding length, so as to ensure the uniform folding length without changing the polybag. Clothes of different sizes can be folded into uniform sizes and packed into bags.
3.Machine will calculate the number of completed pieces automatically, and the alarm function for multiple
garments can be set up.
Folding Machine With Stacking Device,Clothes Stacking Machine,Automatic Folding Machines,Auto Folder
ShenZhen Lingchuang Automated Technology Co.,Ltd , https://www.szlcautos.com