Automatic Truck Wheel Pressure Wash Machine

Automatic Wheel Wash Systems
Main Features:

1.Its ideal for construction industry, mines, energy plants,landfills,quarries and garbage dump.
2.To provides 360° water spray on the bus and truck wheel, vehicle chassis with high pressure water.
3.The wheel washing and solids remove work can be finished fully automatic by photoelectric sensors.
4.The frame adopted high quality steel with preservative treatment can keep the machine stable and long life use.
5.High quality control systems, motors, pumps and photoelectric sensors keep the machine in great running.
6.Very easy to install, maintenance and relocation with our after sales service and lifetime warranty.

Automated wheel wash system havea proven, time-tested track record in providing solutions for:

1. The construction industry
2. Landfills
3. Mines
4. Quarries
5. Aggregate facilities
6. Energy plants
7. Fly ash facilities
8. Remediation sites
9. Industrial wash down







  Automatic Wheel Wash Systems
Main Features:

1.Its ideal for construction industry, mines, energy plants,landfills,quarries and garbage dump.
2.To provides 360° water spray on the bus and truck wheel, vehicle chassis with high pressure water.
3.The wheel washing and solids remove work can be finished fully automatic by photoelectric sensors.
4.The frame adopted high quality steel with preservative treatment can keep the machine stable and long life use.
5.High quality control systems, motors, pumps and photoelectric sensors keep the machine in great running.
6.Very easy to install, maintenance and relocation with our after sales service and lifetime warranty.

Automated wheel wash system havea proven, time-tested track record in providing solutions for:

1. The construction industry
2. Landfills
3. Mines
4. Quarries
5. Aggregate facilities
6. Energy plants
7. Fly ash facilities
8. Remediation sites
9. Industrial wash down







 

OTO Pulley type wire drawing machine

The first Safety precautions for LZ600 wire drawing machine

1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.

1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.

1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.

1.4 It is prohibited for multiple people to operate the same equipment at the same time to avoid accidents.

1. 5 The electric control cabinet should be placed in a clean and dry room, and the door should be closed when working to prevent dust intrusion from causing device performance degradation or failure. Air conditioning is used to maintain the ambient temperature of the electric control cabinet. Frequently check the operation of the cooling fan on the top of the electric control cabinet.

1. 6 Before starting the machine, check whether the safety device is normal.

1. 7 Do not operate the components in the electrical cabinet with power. After cutting off the main power supply, wait at least five minutes, and wait until the intermediate circuit capacitance is discharged before operating the frequency converter, motor, or motor cable.

1.8 Do not touch the IC circuits on the inverter control interface board and motor control board, as static electricity may damage these circuits.

1.9 Please provide the power supply and operating environment according to the technical requirements of Section 3.2. It is not allowed to arbitrarily change the parameters of the frequency converter and PLC. The user shall be responsible for any damage to electrical components caused by human factors.

The second Delivery inspection

2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.

2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.

2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use

OTO type wire drawing machine,pulley type wire drawing machinery

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com