![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
After the mine is in the on-load operation, the operator must observe and pay attention to the following:
(1) The ore must be uniform and the product size meets the requirements.
(2) Pay attention to the operation of the mining and transportation belts at any time to avoid blockage accidents.
(3) Always check the oil pump, cooler, filter and oil temperature, the oil return temperature should not exceed 60 °C.
(4) Check the water-tight drain of the water seal. If there is no water, it is not allowed to run.
(5) Pay attention to check the oil pressure of the lock cylinder. The adjustment ring must be operated under the locked state.
(6) Regularly check the wear of the lining, pay special attention to the lining fixing bolt on the adjusting ring. If it is loose, it will cause the lining to loosen. The new lining should be parked once after 24 hours of work.
Unlike traditional windshield wipers, the boneless windshield wipers do not have the support of the skeleton. Instead, they are assembled with 4 parts including wiper strips, boneless wiper blades, wiper sheaths, and plastic parts. Under this design, not only the wiper is more flexible, compared with the traditional wiper, the force and wear are more uniform, which can achieve a better wiping effect, and it also further improves the driving safety.
Window Wipers,Piaa Wiper Blades,Windshield Wiper Replacement,Windshield Wiper Blades
Taishan Yuanjin Auto Parts CO., LTD , https://www.yuanjinautoparts.com