![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Product Description
Electric double eccentric butterfly valves have the structure of 3D eccentric metal sealed, whose seal mode is metal-to-metal, also can be changed into the other seal modes such as the metal seal ring to the metal, and the stainless steel plate seal ring or the graphite composite plate seal ring to the metal. This 3D eccentric metal seal butterfly valve with high performance is a device to regulate and cut off the medium of those piping in petroleum, chemical, power, metallurgy and city heat supply system.
The parameters
| Body ratings | PN1.0/PN1.6Mpa/PN2.5Mpa |
| Valve size | DN50-DN1200 |
| Seal material | Alloy metal seal |
| Stem seal | NBR, HNBR, PTFE, GRAPHITE |
| Body material | WCB/SUS304/SUS316L/CF8/CF8L Stainless Steel |
| Disc material | WCB/SUS304/SUS316L/CF8/CF8L Stainless Steel |
| Body connections | Wafer/flange |
| Power supply | AC220V |
| Control signal | 4~20mA 0~5V |
| Output signal | 4~20mA 0~5V |
| Operating pressure | PN1.6Mpa, PN2.5Mpa |
| Medium temperature | Below 540 Celesius degree |
Installation Diagram
The material for main parts
|
Item |
Part name |
Material |
|
1 |
Body |
Carbon steel,CF8 Stainless steel,CF8M Stainless steel,CF3M Stainless steel |
|
2 |
Disc |
Carbon steel,CF8 Stainless steel,Cram Stainless steel,CF3M Stainless steel |
|
3 |
Rotatable shaft |
2Cr13,304 Stainless steel,316 Stainless steel,316L Stainless steel |
|
4 |
Disc seal ring |
all kinds of stainless steel composite |
|
5 |
Shaft sleeve |
ZCuZn38Mn2Pb2,stainless steel composite, PTFE |
|
6 |
Packing |
Grafoil |
Control Diagram
| Model | Circuit | Model | Circuit |
| S | ON/OFF,no output signal | CPT | ON/OFF,output 4~20mA signal |
| MS | ON/OFF,output passive contact signal | PCU | Regulation,output 4~20mA signal |
Packing&Shipping
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case
2.Transportation:by sea,by air,by train
Our Services
1.Professional consultation before customer place the order
2.In 24 hours response after sale
3.One year warranty
4.Safe packing for shipment
5.Welcome sample order
Â
Welded Bed Plate For Flanges Of Ship Pipe
The flange welded single-sided seat plate is mainly installed on the top, side wall and bottom of the cabin or cabinet as the entrance and exit of the cabin or cabinet. Valves, accessories or pipes can be installed directly on the single-sided seat plate.
Flange welded single-sided seat plate is suitable for seawater, fresh water, oil, air and steam pipelines below 300 °C. The commonly used nominal diameter is 15~150 mm, and the nominal pressure is lower than 1.6 MPa. The shape of the single-sided seat plate is similar to the corresponding lap-welded Steel Flange.
Flange welded double-sided seat plates are generally used when pipelines pass through decks and tanks, and the two sides of the seat plate are respectively connected to valves, accessories or pipes.
Compared with the single-sided seat plate, the double-sided seat plate has an extra shoulder and double-sided mounting stud bolts. The outer diameter of the shoulder is 10~20 mm larger than that of the corresponding flange, and the thickness of the shoulder is 6~12 mm.
Its scope of application and other structural dimensions are basically the same as those of the single-sided seat plate.
The manufacturing and installation methods of the flange-welded double-sided seat plate are basically the same as the single-sided seat plate, but when the screw holes are drawn, the positions of the upper and lower screw holes of the seat plate must be staggered from each other and must not overlap; deck or bulkhead The diameter of the hole on the top is 2~3 mm larger than the diameter of the seat plate.
Welded Bed Plate For Flanges Of Ship Pipe,Flanges Of Ship Pipe Welded Bed Plate,Welding Base Plate Flange Of Ship Pipe,Ship Pipe Welding Base Plate Flange
Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com