Double Suction Split Casing Water Pump for Fire

High Flow Double Suction Water Pump



Introduction

The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.

Features

Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements

Technical Data
 
Application

*Fire Protection
*Water Transfer
*Municipal Water Supply
*Irrigation
*Industry
*Process Water
*Raw Water Supply
*Dewatering (Clean Water)
*Flood Mitigation

Model Meaning

E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time

Pump Performance
 




Construction Material

Cast Iron, Ductile Iron, Stainless Steel Available.



Pump Drive

Electric Motor / Diesel Engine






Shirley 

Tel: +86(312)6795175
Fax: +86(312)3085385
Mobile+86 13932278621 

Tips: 

Necessary information to be provided to select a pump/ make quotation:
1. Medium to be pumped ( water / partical size / PH / specific gravity / temperature )
2. Horizontal, Vertical or Submersible Pump ?
3. Head / Pressure
4. Flow Capacity
5. Drive type (Motor / Diesel)
6. You local power supply (voltage & frequency)


We specialized in centrifugal pumps including Slurry /Water/Chemical Pumps.
More pump models and spare parts are available.
High Flow Double Suction Water Pump



Introduction

The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.

Features

Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements

Technical Data
 
Application

*Fire Protection
*Water Transfer
*Municipal Water Supply
*Irrigation
*Industry
*Process Water
*Raw Water Supply
*Dewatering (Clean Water)
*Flood Mitigation

Model Meaning

E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time

Pump Performance
 




Construction Material

Cast Iron, Ductile Iron, Stainless Steel Available.



Pump Drive

Electric Motor / Diesel Engine






Shirley 

Tel: +86(312)6795175
Fax: +86(312)3085385
Mobile+86 13932278621 

Tips: 

Necessary information to be provided to select a pump/ make quotation:
1. Medium to be pumped ( water / partical size / PH / specific gravity / temperature )
2. Horizontal, Vertical or Submersible Pump ?
3. Head / Pressure
4. Flow Capacity
5. Drive type (Motor / Diesel)
6. You local power supply (voltage & frequency)


We specialized in centrifugal pumps including Slurry /Water/Chemical Pumps.
More pump models and spare parts are available.

THERMOWAVE Heat Exchanger Gasekts

Germany THERMOWAVE is a global leader in plate heat exchangers and a member of Siemens ------ Guntner Group. Founded in 1932, Guntner Group is a global leader in heat exchangers with 7 production sites worldwide. THERMOWAVE specializes in the production of TL series plate heat exchangers with excellent performance, which is the crystallization of the perfect integration of processing technology and advanced heat transfer technology recognized in the world.

Germany THERMOWAVE plate heat exchanger products are widely used in industrial production of liquid-liquid, vapor-liquid and other heat exchange processes. Such as HVAC refrigeration and air conditioning, petrochemical, electronic industry, electric power, iron and steel smelting, pharmaceutical technology, food and beverage industry, textile industry, paper industry, pharmaceutical industry and other industries.

As the world's leading plate heat exchanger plate manufacturer and seller, Baode has a wide variety of domestic plate heat exchanger plates, more models! It can provide all common types of plate heat exchanger plates from well-known brands at home and abroad (including: AlfaLaval /GEA, TRANTER, SONDEX/HISAKA/APV/Thermowave /Schmidt/FUNKE/VICARB/LHE, etc.).

Thermowave Heat Exchanger Gasekts,Thermowave Plate Heat Exchanger Gasekts,Thermowave Rubber Sealing Gasket

Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodehex.com