RT-K244
This model can be for 2 nozzle, 4 nozzle, both submersible and suction is available
2 Product, 4 flow meter, 4 nozzle.
Loading QTY: 100 PCS /40HQ semi assemble, 40 pcs per complete assembled
* Ambient Temperature: -40~+55 Degree
* Humidity: ≤ 95%
* Max Flow: 60L/min or 80L/min
* Accuracy: ± 0.30%
* Repeating Accuracy: ≤ 0.15%
* Inlet Vacuum: ≥ 54kpa
* Outlet Vacuum: ≤ 0.3MPa
* Power: AC110V± 20%, AC220V± 20%, AC380V± 20% (50Hz)
* Noise: ≤ 70dB(A class)
* Unit price range: 0~9999, 0~999999 (changeable)
* Single range: 1~9999.99, 1~999999.99(changeable)
* Accumulative range: 0~9999999999.99
* Electronic Calibration.
* Voice and printer (option).
* Fueling times limit function.
* Function of locking pump.
* Stop fueling by integer sale.
* Can set the decimal point for the display, so can be used in many country with different currency rate.
* Leaves the communication ports, so it can Communicate with the gas station manage
Main Component( If sumbersible, there are no motor and pump)
Main component | Brand&Model | Specification |
Motor | Sida | Single phase, 220V,0.75KW |
Gear Pump | Tokheim type CP2A | 45L/M |
Flow meter | Tokheim type J3 | 45L/M |
Solenoid valve | MSF-20AA | 3/4inch, flange type |
Hose | Jiaobao | Black, 3/4inch, 4.5meter |
Nozzle | OPW type | 3/4inch, 13/16inch |
Electronic controller | LT-B112 | 8-8-6 digits, with blue display board, film keyboard |
Warantee and after-sale service
Warantee: 18 month after manufacturing, free service : 3 years,  oversea service available
Dimension of machine
940 x 410 x 2050Â CM
Configuration option:
Tatsunp pump + tatsuno meter
Bennett pump+ bennett flow meter
Tokheim pump +Â Tokheim flowmeter
Glibraco pump+Â Gilbarco flow meter
Photos of factory:
1. Infront View

2. Mechanical parts workshop for pump, meter etc

3. Electronic Workshop for LT-B, LT-C, LT-L. LT-W and all the other electronic components

4. Assembling Worshop for fuel dispenser LPG dispenser, CNG dispenser, LNG dispenser etc

5. LPG dispenser under assembling

6. LPG skid station ready for delivery

Gravitational Gold Concentrator
It is suitable for the recovery of single gold in placer gold, vein gold mines and polymetallic mines, instead of mercury plate operations. The addition of large single gold particles in the collected ore before flotation can further increase the recovery rate of gold mines, and it can also be used from gold-bearing mines. Separate single gold from flotation gold-copper concentrate and flotation gold concentrate.The device has the following characteristics:
1.Wide application field: the device can regenate various types of activated carbonon by adjusting the angle and rotational speed of furnace pipe.
2.Regeneration activated carbon in the oven retention time 40 minutes, which is applicable to the regeneration levelofall kinds of grain particles, for coal activated carbon also has good regeneration effect.
3.High degree of automation:the device operation achieves automatic control,with man-machine interface+Intelligent instrument control,reduces the operating workers and the labor intensity is low.
4.High recovery rate of Iodine value:basically returned to a new carbon levels above 90%.
5.Low carbon loss:≤1-2%(Coal carbon)But slightly higher than the JHR-O series activated carbon fuel diesel reclamation equipment
6.Easy installation, covers an area slightly larger, but the small space height requirements, large installed power.
Long service life:The core components furnace tube using thick wall (10 mm thick) 1200 ℃ high temperature resistance, corrosion resistant special stainless steel pipe.
Gravitational Gold Concentrator,Gold Extraction,Gold Recovery Equipment,Gold Washing Equipment
Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com