High Efficiency Slurry Pump Manual (100EZ-A50)

  • Model NO.: 100EZ-A50
  • Working Pressure: High Pressure Pump
  • Position of Pump Shaft: Horizontal Pump
  • Mounting Height: Since Irrigation Centrifugal Pumps
  • Usage: Pumps
  • Application 2: Metallurgy
  • Pump Type: Horizontal Slurry Pump
  • Shaft Lubrication: Oil Lubrication
  • Seal Type: Centrifugal Seal, Mechanical Seal
  • Specification: ISO9001: 2008
  • HS Code: 84138100
  • Impeller Number: Single-Stage Pump
  • Influent Type of Impeller: Single Suction Pump
  • Pump Casing Combined: Horizontal Split Pumps
  • Impeller: Closed
  • Application 1: Mining
  • Application 3: Coal Washery
  • Connection Type: DC, Dcz
  • Main Material: High Chrome Alloy
  • Trademark: Excellence
  • Origin: China
Slurry Pump Manual (100EZ-A50)

1. Introduction:

The EZ series mining slurry pumps are designed as single-stage, single-suction centrifugal pumps. They are classified into the horizontal version (EZ type) and vertical version (EZL type) according to mode of construction and the discharge diameters of horizontal pumps vary from 300mm to 200mm, 150mm, 100mm, 80mm, 65mm, 50mm, 40mm, etc. And the discharge diameters of vertical pumps vary from 150mm to 100mm, 80mm, 65mm, 50mm, etc.

The centrifugal pumps are innovative in both hydraulic and structural designs. The wet parts are made from self-developed high-chrome alloy cast iron with high wear-resistance. They are of energy- saving, high efficiency, little vibration, low noise, long service, lightweight, reliable operation and easy maintenance.

2. Application:

Series EZ slurry pumps are widely used in the mining, coal washery, power plant, metallurgy, petrochemical, building material, dredging and other industrial departments, etc. It is used in the various working sites including hydrocyclone feeding pump, magnetic separator feeding pump, underflow slurry pump (thickener underflow pump, Filter separator underflow pump), flotation feeding pump, vibrating sieve feeding pump, shaking grading pressure pump, concentrate pump, and tailing pump.

High Efficiency Slurry Pump Manual (100EZ-A50)
High Efficiency Slurry Pump Manual (100EZ-A50)

3. Model Explanation:      100EZ-A50

100: Discharge diameter (mm)
E: Excellence brand 
Z: Slurry pump
A: Number of vanes of impeller (A: 5 B: 4 C: 3 F: 7 G: 8)
50: Impeller diameter (cm)

4. Performance Chart:

High Efficiency Slurry Pump Manual (100EZ-A50)

 
 

Tangential Flow Pump

The tangential pump is divided into two types: vertical and horizontal. Its biggest feature is that the flow-head curve is very flat, that is, in the full flow range, the head does not change much, and when the pump flow changes from zero to the required maximum flow range, its The head change is within 5%, and there is no overpressure at low flow or zero flow, thus avoiding the phenomenon that the ordinary Centrifugal Pump is overpressured at medium and small flow and cannot supply water at large flow at the fire scene, greatly improving the fire extinguishing efficiency and firefighters. safety and reliability.
The motor of the thread tangent pump is an ordinary motor and does not need to be changed. It effectively solves the pressure fluctuation when the flow rate changes in the water supply process, and the problem of serious overpressure when the flow rate is small. Compared with the parallel operation of multiple pumps, it can reduce the number of pumps, reduce the floor space, and is easy to operate and manage; compared with the variable frequency speed control pump, it can save investment, facilitate management, and has many advantages. It is a more complete solution to overpressure. Method.

Tangential Flow Pump,Magnetic Drive Tangential Flow Pump,Process Pump,Pump Tangential Flow Pumps

Jiangsu Qiantu Trading Co., Ltd. , https://www.qiantupump.com

Posted on