Industry Mold Temperature Regulator for Extrusion Industry

Model NO.: MPR-50-36
Heating Capacity: 36kw (Adjustable)
Pump Flow Rate: 16m³/H
Heat Source: Water
Control Mode: Board Self-Optimized Microprocessor
Emp. Control Accuracy: Within +/- 1ºC
Cooling Method: Direct Heating (Direct Cooling)
Safety Protection: 9 Ways
Lifetime: More Than 5 Years
Application: Plastic Injection, Extruder, Blowing Machine
Trademark: MAIPT
Transport Package: Wooden Case as Usual
Specification: 1200*420*1000
Origin: China
HS Code: 8419899090
Industry Mold Temperature Regulator for Extrusion Industry
 
 BRIEF DESCRIPTION WWW.MAIPT.LTD/
 
Mold Temperature Control Units(TCU) PID process controller are used to preheat a process to the desired operating temperature by engaging the unit's electric immersion heater and recirculating the oil in the system. Water type TCU circulate high temperature heat transfer fluid through the process application for temperature control.

MPR series TCU is pecially engineered for the temperature control of Rubber & Plastic industry. This series are highly customizable, has special forced cooling function with high-strength cooling capacity.

MPR series TCU offer the temperature range from 15°C to 98 °C, customized heating capacity and voltages are available.
Industry Mold Temperature Regulator for Extrusion Industry
 FEATURES / FUNCTIONS / SAFETY PROTECTIONS WWW.MAIPT.LTD/
 
  BASIC FUNCTIONS * OPTIONAL FUNCTIONS
- Thermometer for return water   * Control mode: PLC
- Switchover of heating power   * Explosion-proof device
- Automatic air-exhausting after startup   * RS485 remote control function
- Control mode: Microcomputer control   * Air-blowing and return water function
- BY-PASS pressure release loop for hot water   * Customizable multi-point Temperature unit
- SUS integrated pipelines for less pipe resistance   * Customizable horse power and heating power for water pump
- System pressure & Functional test before shipping    
  SAFETY PROTECTIONS                                                   
  Temperature anomaly                                    →  Alarm and cut off power, when cycle-water's Temp. exceed upper limit.
  Power reverse                                              →  Power supply phase detection to prevent pump reverse, alarm indication.
  Pump overload →  Thermal overload relay protect pump from overloading, alarm indication.
  Low water protection →  Level-switch detects the oil level, prevent low water and alarm indication.
  Pressure anomaly →  Automatic stop heating operation when system pressure anomaly.
  Anomaly heating →  Heating contactor working, and anomaly heating alarm indication.
  Pipe blockage →  BY-PASS pressure release loop to protect pump.
  Air exhaust Function →  Automatic air-exhausting after startup.
  Short circuit →  Air-break switch - releasing.
 
 DETAILS SHOW WWW.MAIPT.LTD/
Industry Mold Temperature Regulator for Extrusion Industry
 TECHNICAL SPECIFICATION WWW.MAIPT.LTD/

Specification Table for MPR Series
Model Heating Capacity Pump Data Pipe Connecting Approx. Dimention
Power Flow Lift Inlet Outlet Weight L*W*H
KW BTU/Hr KW L/min m DN DN KG mm
MPR-30-36 36 122,868 2.2 150 22 25 25 180 1150*420*1000
MPR-30-60 60 204,780 2.2 150 22 25 25 220 1350*500*1150
MPR-30-80 80 273,040 2.2 150 22 25 25 240 1350*500*1150
MPR-50-24 24 81,912 3.75 250 30 32 32 130 1150*420*1000
MPR-50-36 36 122,868 3.75 250 30 32 32 185 1150*420*1000
MPR-50-60 60 204,780 3.75 250 30 32 32 220 1350*500*1150
MPR-50-80 80 273,040 3.75 250 40 100 100 240 1570*550*1250
MPR-75-36 36 122,868 5.5 300 49 50 50 185 1570*550*1350
MPR-75-60 60 204,780 5.5 300 49 50 50 225 1570*550*1350
MPR-75-80 80 273,040 5.5 300 49 50 50 245 1570*550*1350
MPR-75-120 120 409,560 5.5 300 49 50 50 265 1570*550*1350
MPR-100-60 60 204,780 7.5 466.7 59 50 50 230 1600*600*1500
MPR-100-80 80 273,040 7.5 466.7 59 50 50 280 1600*600*1500
MPR-100-120 120 409,560 7.5 466.7 59 50 50 320 1600*600*1500
MPR-100-225 225 767,925 7.5 466.7Soil Drilling Machine

Introduction to QY series sampling robot

QY series sampling and repair robot is a highly integrated and automatic equipment specially applied to soil investigation and repair. Its multiple functions directly meet the technological requirements of soil investigation and repair. This robot has been recognized as a specialized and special new product in Jiangsu Province in 2020. The performance of QY series robot has reached the international level of the same model.Key components are purchased from the world,consumables and Drilling Tools are all made in China.Compared with imported parts, QY series robot has the advantages of low cost and short supply cycle.

1. Small volume. The machine is smart, which can meet the needs of indoor construction and work flexibly in narrow space.
2. High torque. The rig is equipped with a drifter, and its maximum torque is 6600NM.
3. High sampling rate.
4. Wide crawler can ensure the safe construction in the geological loose area.
5. Excellent operation. The configuration of wireless remote control is simple and convenient to operate. The movable operating table is matched with the double rotary table angle changing mechanism, which makes the hole more flexible.
6. Fast walking. Can reaching the construction area quickly and saving construction preparation time.
7. Energy conservation and environmental protection.
8. Safety protection mechanism. Built-in accurate hydraulic temperature control module, real-time monitoring of equipment operation, play a role in monitoring and early warning protection.


Soil Drilling Machine,Soil Boring Machine,Soil Nail Drilling Machine,Soil Boring Equipment

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com

Posted on