M3-M30 of Nylon Hex Flange Nut with Carbon Steel

  • Model NO.: M3-M30
  • Type: Hexagon Head
  • Head Style: Hexagonal
  • Grade: 8.8
  • Trademark: NGL
  • Origin: Ningbo, China
  • Material: Carbon Steel
  • Connection: Nuts
  • Standard: DIN
  • M3-M30: Finish Passivation, Chromium-Plating, Black Oxide,
  • Specification: M3-M30
  • HS Code: 7318151001


M3-M30 of Nylon Hex Flange Nut with Carbon Steel
M3-M30 of Nylon Hex Flange Nut with Carbon Steel
Product Description

Nylon Insert Hex Flange Lock Nut,Flange Nylon Lock Nuts,Hex Nylon Lock Flange Nut


Nylon insert lock nuts are hex nuts that have a captive nylon washer mounted in their top to create a prevailing torque type lock nut. The undersized washer forms a compression grip that binds on the threads of the mating fastener to resist loosening. Due to limitations of the non-metallic insert, the nuts cannot be used at elevated temperatures or with certain chemicals but the nylon washer does provide a gas and moisture seal. Various colors of nylon are used; some manufacturers use a specific color. Regular, thin pattern and machine screw nylon insert lock nuts are used in aerospace, agricultural equipment, appliances, avionics, computers, furniture, home and garden, lighting, medical equipment and vehicles (auto, truck and trailer). Heavy pattern types are used on bridges and buildings, in heavy industry, and on oil field machinery and railroad equipment. Nylon insert lock nuts are also known as: 
  
aircraft lock nuts, elastic lock nuts, elastic stop nuts, nyloc nuts, nylock nuts, nylon insert stop nuts, stop nuts.
  
 Because the washer largely returns to its original form, nylon insert lock nuts may be reused a limited number of times. Lock washers are not used with prevailing torque lock nuts.
The bolt or axle has one or two holes drilled through its threaded end. The nut is torqued properly and then, if the slot is not aligned with the hole in the fastener, the nut is rotated forward to the nearest slot. The nut is then secured with a split pin, R-clip or safety wire. It is a positive locking device.
Castellated nuts are used in low-torque applications, such as holding a wheel bearing in place.

 

Products name		 Nuts(Hex Nut,Heavy hex nut,Flange nut,Nylon lock nut,
Weld nut Cap nut,Cage nut,Wing nut)
Standard: DIN,ASTM/ANSI JIS EN ISO,AS,GB
Material Stainless Steel: SS201, SS303, SS304, SS316,SS316L,SS904L ,F594
Steel Grade: DIN: Gr.4,5,6,8.8,10,;  SAE: Gr.2,5,8;  ASTM: A563
Finishing Zinc(Yellow,White,Blue,Black),Hop Dip Galvanized(HDG),Black Oxide,
Geomet,Dacroment,anodization,Nickel plated,Zinc-Nickel plated
Production 
Process		 M2-M24:Cold Froging,M24-M100 Hot Forging,
Machining and CNC for Customized fastener
Customized Products
Lead time		 Busy season:15-30days,Slack seaon:10-15days
Stock Products Carbon steel:DIN934,DIN6923,DIN928,DIN929,ISO4032,Cage nut,Cap nut
Stainless steel: All DIN Or GB Standard stainless steel Nut
Free Samples for standard fastener

PTA Powder

Main application:Repair and strengthen workpiece surface, significantly

Welding method:PTA welding

Main equipment:PTA welding machine

Flame core temperature: about 10000℃

Technological characteristics:PTA has high temperature, concentrated energy, stable combustion, small heat affected zone, fast welding speed, high production efficiency, easy to obtain low dilution rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical bonding,, bonding strength is high.

Gpni0105b X100

PTA welding technology is one of surface strengthening methods, which has high deposition rate, low dilution rate, and could be applied with many kinds of powder. The manufacturing craft of PTA powder is normally gas atomization, which reduces satellite of powder. We supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based alloy powder, Cobalt-based alloy powder and Mixed Powder.

Nickel Based Alloy Powder possesses high temperature resistance and wear resistance, it is the most popular alloy powder applied by PTA welding both domestically and internationally. Coating hardness is within the range of HRC 30-60. It could be applied to various industries like agriculture, plastic, paper, marine and steel making where wear and corrosion protection needed. Some examples are plunger, moulds, pump leaf and screw.

Iron Based Alloy Powder is more widely used and a more economic choice. With high abrasive resistance, it is more commonly applied to mining tools, drilling tools and mixers of iron and steel making industry, coal industry, shaft, oil and energy industry.

Cobalt Based Alloy Powder is recommended for corrosion and oxidation resistance, with better hot hardness values than equivalent Nickel based alloy powder. It is widely applied to steel making industry, coal industry and mining industry.

Mixed powder mainly refers to NiCrBSi mixing with other hard-phase powder such as cast tungsten carbide and other cemented alloy powder, which allows the powder better hardness around HRC60 and excellent abrasion resistance.

Mixed powder is more often used for mining equipment for oil sands, lignite, oil drilling tools, excavator buckets, extrusion screws for plastic processing, grain and oil processing, etc.

PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.hvofpowders.com

Posted on