Panel Roll Forming Machine From China

Model NO.: panel roll forming machine
Drive Way: Chain or Gear Box
Size: Depends on Final Design
Forming Speed: 16~20m/Min or According to Customer′s Requirment
Delivery Time: 30 Days Finished and 10 Days More to Test
transportation: by Sea or Train
Operating: One Experienced Person Is Enough
Trademark: STW
Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case
Specification: CE
Origin: China
HS Code: 84552210
No.       item Parameter(all is subject to our final design)
1
 		 Suitable raw material Type Common galvanized & pre-painted steel
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-0.7
width(mm) According to final design
2 Manual uncoiler's capacity Max.5tons
3 Forming speed(m/min) About 18-20m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around19-20 groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 9-10tons
Roof Panel Roll Froming Machine; Steel Corrugated Sheet Forming Machine; Steel Sheets Forming Machine; Roll Forming Machine; Forming Machine; Cold Roll Forming Machine; Steel Corrugated Forming Machine.

Panel Roll Forming Machine From China
Components:
The Uncoiler and Its Base
Coil Sheet Guiding and Adjusting Equipment
Film Covered Device
Main Roll Forming System
Post-Cutting Device
Hydraulic Station
PLC Control System
Support Table
Panel Roll Forming Machine From China
The Technical Parameters:
Suitable Raw Material: Color Steel Sheet; Galvanized Steel Sheet
Thickness of The Material: 0.4m to 0.7mm
Yield Strength of Material: 235mpa
Uncoiler's Loading Capacity: Max. Capacity: 5000kgs. (Can Be Increased to Be 10 Tons)
Forming Speed: About 15m/Min
Main Motor Power: 5.5kw(Depend on Final Design)
Hydraulic Station Power: 2.2kw(Depend on Final Design)
Controling System: Mitsubishi PLC & Converter
Voltage: 380V, 3 Phase 60Hz or According to at Buyer's Requirment.
The Quantity of The Roller Group: At Lest 15 Groups(Depend on Final Design)
Machine Dimension: About 20m*1.5m*1.4m(Depend on Final Design)
Total Weight: About 10000kgs(Depend on Final Design)
Material of Roll Former System
Roller: High Grade No. 45 Forged Steel, Plated Hard Chromed on The Surface of Rollers
With Thickness 0.05mm.
Active Shaft Material: High Grade No. 45 Carbon Wrought Steel at Diameter 75mm.
Cutting Blade: Cr12 Mould Steel with Quenched Treatment.

Working Flow
Decoiling The Sheet---Guiding The Sheet---Covering The Film---Roll Forming---Measuring The Length---Cutting The Panel---Panels to The Supporter
Panel Roll Forming Machine From China

Features  of CNC bearing roller grinder Machining
1. The  roller Bearing Grinding line is used with world lead techniques, such as the SBS self adoption control system, quick approach and prevent impact, etc. All the control system and machine tools used are from internationally famous brands, thus having the features of high precision, high efficiency and long lifetime.
2. The roller bearing grinding line has the function of choosing technical data based on grind cuts self adoption control. It has size error feedback and can be adjusted by itself. It has an automatic alarm when grinding wheel is not in a good position. The roller bearing grinding line features piece dimension and tolerance automatic stop. 
3. The roller bearing grinding line features high efficiency, stabilized loading, passport and make up system, reduced cost, and promoted quality.

Bearing Raceway Grinding Machine

Grinder Roller,Bearing Raceway Grinding Machine,Raceway Bearing Roller Grinder,Taper Raceway Bearing Grinding

Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com

Posted on