Radiator and valve basics

Heating radiator is the end of the family heating system cooling equipment, heating radiator principle is the natural convection of air, radiator heating comfort, no noise, no drying, high thermal efficiency, energy saving thermostat, each room radiator can be individually adjusted by the thermostatic valve temperature. Modern radiator appearance, with good decorative effects. A steel, aluminum, copper and aluminum composite, stainless steel, cast iron radiators and other types. Generally installed in the room on the wall. Each radiator to install a set of inlet and outlet valves, by adjusting the amount of water to adjust the heating temperature of each room, the owner can freely adjust the room temperature according to their needs, the host according to the heating energy consumption of each room automatically adjust the radiator intake , So as to achieve the comfort and energy saving heating effect. Radiator water inlet valve has a common type and automatic temperature control with two types of ordinary inlet valve for the Promise regulation; automatic temperature control type inlet valve can automatically adjust the room temperature setting radiator inlet is a graduated A very adjusted, easy operation and control. Commonly used ordinary water inlet and outlet angle valve, with Italy Caleffi and Denmark Danfoss brand products.

Finned Tube

The finned tube is to improve the heat exchange efficiency. By adding fins on the surface of the heat exchange tube, the outer surface area (or inner surface area) of the heat exchange tube is increased, so as to achieve the purpose of improving the heat exchange efficiency. Such a heat exchange tube . Usually used for heat exchange between liquid and gas.

Finned tube is a heat exchange element. As a heat exchange element, finned tubes usually work under high-temperature flue gas conditions for a long time. For example, the finned tubes usually used in boiler or harsh environments, high temperature and high pressure, and in a corrosive atmosphere. This requires that the finned tubes should have high anti-corrosion properties, Anti-wear properties, lower contact resistance, higher Stability and anti-dusting ability.

There are many types of finned tubes, and new varieties are constantly emerging. According to the classification of processing technology, there are extruded fin tube; high frequency welded finned tubes; rolled formed finned tubes; suit formed finned tubes ; cast finned tubes; tension wound finned tubes; Inserted tubes.

According to the shape of the fins, there are square finned tubes; circular finned tubes; spiral finned tubes; longitudinal finned tubes; corrugated finned tubes; spiral serrated fins Helical Serrated Finned Tubes; pin-shaped finned tubes; integral plate-shaped finned tubes; inner finned tubes.

According to whether the fin material of the finned tube is the same as that of the base tube, it can be divided into: single metal finned tube, bimetallic composite finned tube.

Single metal finned tubes are classified by material into copper finned tubes; aluminum finned tubes; carbon steel finned tubes; stainless steel finned tubes; cast steel finned tubes.

Finned Tube,Extruded Fin,Brown Fin Tube,Longitudinal Finned Tube

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com