First: The water jacket inside the sprinkler should be kept clean.
Second: The fuel of the sprinkler is best to use a low condensation point, good fluidity, oil and lubricant. The grease is best used with low viscosity.
Third: Clean the cooling system and add antifreeze.
Fourth: Add a “coat†to the battery, and properly lower the density of the electrolyte to prevent the battery case from freezing.
Fifth: The starter must also be thoroughly cleaned. In winter, the starter is relatively weak.
Sixth: The thermostat must maintain normal operation.
Seventh: In the winter, increase the limit voltage of the regulator by 0.6V.
Shell And Tube Condenser,Cross Flow Heat Exchanger,Stainless Steel Heat Exchanger,Air Pressure Container
Wuxi Dingfeng pressure vessel Co., Ltd , https://www.wuxidingfeng.com