Structural parameters of mining method in vertical deep hole spherical package mining stage

    The nuggets have two arrangements along the strike and the vertical. The thickness of the ore body is less than 20m and is arranged along the strike. At this time, the thickness of the ore body is the width of the mine; the thickness of the ore body is greater than 20m, and the vertical direction is arranged. At this time, the thickness of the ore body is the length of the mine. The length of the mine is determined according to the stability of the rock, and is generally 40 to 100 m. The height of the nugget is determined by the effective drilling depth of the rig and the accuracy that can be achieved, generally 40 to 60 m.
When the ore body has been fully explored, the ore block should be divided from the bottom to the top. At this time, the rock drilling level of the next stage can be used as the level of the mine in the previous stage, and the top of the rocking roadway does not need to leave the top column. When the ore body has not been explored or for other reasons, it is only possible to divide the ore block from top to bottom. At this time, the bottom column of the lower stage of the previous stage should be 4 to 5 m, and the next stage of rock drilling roadway is at the bottom column. Excavation to ensure safe operation.
The structural parameters of the ore blocks of major mines at home and abroad are shown in Table 19-22.
Table 19-22 VCR method structure parameters

Mine name

Mine layout

Parameter (m)

Mine height

Mine length

Mine width

Pull height

Fankou lead zinc ore

Jinchuan DIGGINGS

Phoenix Mountain copper mine

Dachang tin mine # 91

Levak Mine, Canada

Canadian Centennial Mine

Canadian birch mine

Spanish Rubles Mine

Almaden Mine, Spain

American Ace Karan CIBC mine

American Carfooke Mine

Vertical orientation

Vertical orientation

Along the way

Along the way

Along the way

Along the way

Along the way

Vertical orientation

Along the way

Along the way

Vertical orientation

40

50

40

25~50

45

45

34

70

60

30.5

60

30~40

38~40

30

72

50

35

38

20~30

50~60

12

40

8~10

6~8

10

12

6

6

6~15

16~20

6~8

6

15~20

6~8

6

2.5

3

6

5

15

6

6

6

Prospecting Core Drilling Rig

Core Hole Drilling is a drilling technique whereby an oil or gas well is drilled either in a vertical hole or horizontal hole. The method used to drill a vertical hole is known as vertical drilling whereas for a horizontally drilled hole is known as horizontal drilling.

The core drill rig of full hydraulic and rotor adopted the technology of wire-line coring has been the dominant type rig for solid mineral deposits prospecting in developed counties of the world. The rig is light, simple in structure, and easy for transportation. The mast has the functions of sliding and touching ground, the spindle lifted and lowered with hydraulic cylinder. It could be folded for transport and relocation. The spindle hole is in large diameter.

1-11-exploration-and-coring-drill-rig_01

It is a thoroughly new-type wire-line Core Drilling Rig developed on the basis of the market demand and the advanced techniques in the world. It is mainly used for metal&nonmetal solid exploration and exploration of coal-bed methane, nature gas mining, hydrogeology well drilling, geothermal well drilling, mining gallery, ventilation and drainage of exploratory and emergency construction projects.

In most cases, it can drill into stratums with depths of more than 350 meters and more than 500 meters and can be widely used in core drilling work with extremely complex ground conditions.

It is ideal equipment for deep-hole geological exploration drilling. Contact us to get a cheap YK core drilling machine price.

Ores Prospecting and Lab Experiment,underground prospecting,geological investigation

Henan YK Prospecting Machinery Co., Ltd , https://www.yydthdrillingrig.com

Posted on