Taiwan Fu Hao launches a new type of vibration grinding machine

In Taiwan, China recently launched a new type of box-type vibratory grinding machine, which effectively solves the problem of the traditional vibrating mill's small operating space, uneasy operation, and unsmooth operation when grinding large-size workpieces.
The grinding machine introduced by Taiwan Fuxi Vibration Machine Co., Ltd. has an internal large space design, fixtures can be flexibly changed, smooth rolling during processing, applicable to all kinds of aluminum-magnesium alloy die-casting parts, computer cases, bicycle racks, car covers Such as the size of the workpiece. This product has high grinding precision and excellent quality on the surfaces of these aluminum-magnesium alloy and electronic parts products.
Related news:

Vesconite Sheet Rod Bushing

Vesconite Sheet Rod Bushing (Standard Vesconite - Black) is a specialized thermoplastic made from internally lubricated polymers. Proved since the 1960's as an exceptional bearing material in demanding conditions, Vesconite gives low wear even in dirty or unlubricated conditions. Up to 10 times the life of bronze in dirty conditions. Vesconite has high dimensional stability and does not swell in water, in contrast to most synthetic materials which swell in water. For example, nylon swells up to 3% in water and softens.


Vesconite Tube Rod are produced in Standard 1 meter lengths (39.37 inch = 3.28 feet)

Vesconite


Vesconite Sheet Rod Bushing is available in Hollow bar (Bushing), Solid bar (Rod) and Plate (Sheet) form. It is easily machined and we also provide a fully finished machined bush/component service.


Vesconite Rod Sheet Features :

High Load Bearing Strength - VESCONITE has very low creep rates under design loadings of 4,351 psi (30 Mpa). Much higher load capacity than nylon and elastomers.

Dimensional Stability - The thermal expansion factor of VESCONITE is only 2.5 times that of bronze, lower than many of the competitors. HDPE and nylon is 5 and 10 times greater, respectfully.

No Water Swell - Only 0.5% at ambient. Negligible in sizing calculations. Most of the competition is way above this. Nylon has a 9-10% water swell. Elastomers have a 1.3 - 3% water swell. Phenolics are at generally at 1.6 - 2% water swell. Water swell is one of the primary causes leading to shaft seizure.

Low Friction - Dynamically, about half that of bronze and nylon. This allows for greater combinations of loads and speeds. Greasing of VESCONITE further deceases friction, allowing higher speeds and improved performance. Water is also an excellent lubricant for VESCONITE bushings.

Abrasion Resistance - VESCONITE provides outstanding abrasion resistance resulting in many times longer service life, when compared to bronze. It is also outperforms other products in poor lubrication and dirty conditions.

Longer Life of the Mating Surfaces - The wear of metal pins and shafts is reduced by up to 90% when VESCONITE bushings are used. This fact, alone, justifies the use of VESCONITE ΓÇô less maintenance.

Chemical Resistance Vesconite is highly resistant to diluted acids, organic solvents, oils, and petrol. It has limited resistance to strong acids and strong alkalis.

Temperature Resistance -Vesconite can withstand continuous temperatures up to 212°F (100°C) dry and 176°F (80°C) wet, with momentary peaks above this. Above 158°F (70°C) an expansion gap must be incorporated into the bearing design for a proper use.


Industries we supply Vesconite to:

- Marine

- Mining

- Railways

- Agriculture

- Earth Moving

- Heavy Transport

- Food & Beverage

- Materials Handling

- Bottling & Processing

- Steel, Paper & Textiles

- Hydraulics & Pneumatics

vesconite




Vesconite Sheet Rod Bushing,Vesconite Tube Sheet,Vesconite Rod Sheet,Vesconite Tube Rod

Hony Engineering Plastics Co.,Ltd. , https://www.honyplastic.com

Posted on