Wuhan passenger plane found fault before stopping passengers fortunately did not go to heaven

Wuhan passenger plane found that before the take-off before the failure of passengers fortunately did not go to the sky diesel generator | diesel generator price / 2012-03-10

shock! Aircraft taxiing before take-off
Fortunately! The unit discovered mechanical failure in time
Wuhan-Qingdao flight's airline delayed 8 hours from Beijing emergency flight
At 0:30 yesterday morning, the Wuhan-Qingdao 8L9959 flight took off after 8 hours of delay, and more than 100 passengers did not complain, but they were somewhat fortunate.
A passenger told reporters that it was fortunate to find faults in time before take-off. If it was discovered by flying into a genius, the trouble was still greater.
The reporter learned that the 8L9959 flight is a Kunming-Wuhan-Qingdao flight. It landed in Wuhan on the same day the day before yesterday. It plans to take off at 16:45. After the passenger boarded the plane, the crew closed the passenger cabin door. When the plane taxied, it suddenly stopped and then turned back to the terminal of Tianhe Airport. It turned out that the crew found a mechanical failure in time and needed to be removed to take off again.
Xiang Peng Airlines said that after inspection, the failure required the replacement of aviation materials. The company urgently contacted other airlines and transported aircraft maintenance materials from Beijing. The flight waiting time lasted nearly 8 hours. The company therefore provided 300 yuan compensation for each passenger.
Because the flight uses the same passenger aircraft as the Qingdao-Wuhan-Kunming 8L9960 flight, it also caused the 8L9960 flight to depart 8 hours later.
Next:Installation, use and regulation of marine diesel generator sets
Previous post: Men's street stripping car only to attract attention to home fare

201 Stainless Steel Shot

Longlived 201 Stainless Steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 201 stainless steel Cut Wire Shot is the most popular abrasive of them as its excellent performance. The composition of 201 stainless steeel is: C≤0.15, Cr 14.00-16.00, Ni 3.50-5.50, Mn ≤5.50-7.50, P≤0.060, S≤0.030, Si≤1.00. So you can check if 201 Stainless Steel Shot could meet your requirement. Generally 201 stainless tseel cut wire shot could be classfied two kinds. One is as cut and the other is conditioned. Compared with as cut one, conditioned is without sharpe edges and corners and has near round shape. According to this, you can choose the more suitable one.

201 Stainless Steel Shot,Sus201 Stainless Steel Shot,Ss201 Stainless Steel Shot,Cut Wire Shot Of Metal Abrasive

Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com

Posted on