![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Installation requirements and precautions for plug-in electromagnetic flowmeter
Accurate measurement needs to choose the correct instrument, the quality of the instrument is the main, and secondly, it is necessary to consider the installation requirements. If the installation is not standardized, the instrument cannot be fully utilized. Therefore, we must pay attention to the installation of the flowmeter. Yibi company's technical staff to introduce you to the installation requirements and precautions of the plug-in electromagnetic flowmeter:
1. Plug-in electromagnetic flowmeter should be kept away from equipment with strong electromagnetic field;
2 , the installation site should not have strong vibration, the pipeline is fixed firmly, and the ambient temperature does not change much;
3 , the installation position must ensure that the pipe is always filled with the measured fluid, the length of the straight pipe on the upstream side of the sensor installation pipe is greater than 8D, and the length of the straight pipe on the downstream side is not less than 5D;
4. Clean the welding slag and burrs of the base of the pipe to be tested;
5. Install the DN80 ball valve on the mounting base, pay attention to the long cavity of the ball valve up, check that the ball valve switch is normal; install the compression screw seat kit to the ball valve, loosen the positioning screw and the compression nut, insert the sensor into the rod and insert through the ball valve. The pipe being tested. The insertion depth of the sensor is 3mm outside the base. After meeting the requirements, tighten the positioning screw and the compression nut. Also note that the sensor direction mark is consistent with the fluid flow direction.
6. The opening on the pipe to be tested is larger than the base pipe, and the depth of the base pipe inserted into the opening of the pipe to be tested is the flatness of the two sides;
7. The plug-in electromagnetic flowmeter is welded by stainless steel welding rod, and the flange surface is parallel to the tube axis after welding;
8. Connect the power supply and other connections according to the instructions of the plug-in electromagnetic flowmeter. After power-on, check the instrument display to confirm that the pipe under test is full of fluid and the flow rate is zero. ;
9. After the fluid in the pipe under test is flowing and stable, check the instrument display. At this time, turn the sensor direction to maximize the displayed value, and lock the positioning screw and the compression nut;
10. For the case where the flow variation range is large and the fluid velocity is lower than the minimum flow rate required by the flowmeter for a long time, it should be considered to reduce the process pipeline or use two large and small small parallel flowmeters;
11. The plug-in electromagnetic flowmeter should be installed on the vertical process pipe as well as the ordinary electromagnetic flowmeter. This prevents the suspended solid from sinking on the electrode and raises the oil in the fluid outside the measurement range of the electrode. When the flowmeter is installed on the horizontal process pipeline, the electrode of the sensor should be placed on the horizontal axis to avoid the interference of the electrode due to the bubble, resulting in measurement error;
12 , vertical installation, the sensor should be inserted into the pipeline should be less than 5 ° angle with the vertical diameter of the pipeline section, suitable for measuring the cleaning medium with small vibration of the pipeline;
13. Tilt-mounted, the axis of the sensor is 45° from the axis of the pipe to be tested. It is suitable for large-diameter and measuring the flow of liquid containing other impurities in the medium. The installation method has small water resistance and should not be entangled.
China leading manufacturers and suppliers of Foaming Soap Dispenser,Foam Dispenser Pump, and we are specialize in Foam Soap Dispenser Pump,Modern Foaming Soap Dispenser, etc.WIth a pump that produces 1.6cc foam output, you only need 1 pump for any application from hand washing to detergent cleaning. Save time and effort with a quality pump that dispenses the perfect amount of quality foam.
Foaming Soap Dispenser,Foam Dispenser Pump,Foam Soap Dispenser Pump,Modern Foaming Soap Dispenser
NINGBO LUX PACK CO.,LTD , https://www.nblux-pack.com